Skip to content

Install a Door Gasket on Atosa Refrigerators and Freezers

How to Remove and Install a Door Gasket on Coolers

In this comprehensive guide, we will walk you through the process of removing and installing the door gasket on all types of coolers. The best part? No tools are required for this task. Whether you work in refrigeration or enjoy DIY projects, this step-by-step guide will help you get great results. Let's dive in and explore the details of this simple yet essential maintenance task.

Understanding the Door Gasket

The door gasket is an important part of any cooler. It helps the door seal tightly to keep the inside temperature steady. This not only helps in energy efficiency but also protects the contents inside the cooler. Over time, gaskets can wear out, leading to air leaks and reduced efficiency. Therefore, it's important to know how to replace them when necessary.

Removing the Old Door Gasket

Begin by removing the old door gasket. The gaskets on all of our coolers are designed as press-in gaskets. They have an arrow-shaped connection that fits into a channel on the door frame. Here is how you can remove the old gasket:

  • Step 1: Firmly grasp the gasket. Start at one corner of the door to make the process easier.
  • Step 2: Pull the gasket outwards, away from the door. The arrow-shaped connector will slide out of the channel, allowing you to remove the gasket completely.

Once the old gasket is removed, you are ready to proceed to the next step: installing the new gasket.

Installing the New Door Gasket

Installing a new door gasket is just as simple as removing the old one. Follow these steps to ensure a proper fit:

  • Step 1: Start at the corners. This will make the installation process a bit easier and help you align the gasket accurately.
  • Step 2: Line up the arrow-shaped connector with the channel in the door frame. Make sure it is properly aligned before proceeding.
  • Step 3: Firmly press the new gasket into the channel. Work your way along the length of the gasket, pushing it into the channel on the door as you go.

Continue to press the gasket in this manner, working your way completely around the door. Ensure that the gasket is securely fitted in all areas to prevent any air leaks.

Final Checks and Maintenance Tips

Once you have installed the new gasket, it's important to perform a few checks to ensure everything is in place:

Check for Gaps: Use your fingers to feel along the edges of the gasket. Look for any gaps or spots where the gasket is not seated correctly.

Test the Seal: Close the cooler door and ensure that it seals tightly. Listen for any air leaks or unusual noises that might indicate a poor fit.

Regular maintenance of your coolers can extend their lifespan and improve efficiency. Here are a few additional tips:

Conclusion

Thank you for following this training guide on how to remove and install a door gasket on coolers. By following these simple steps, you can keep your refrigeration equipment running well and working at its best. Regular maintenance and timely replacement of gaskets can save you energy costs and keep your contents safe.

Additional Resources

For more information and detailed guides on cooler maintenance, visit our website. You can also watch our instructional videos for visual guidance on various maintenance tasks.

The Restaurant Warehouse

  • Free delivery and Fast Shipping to your restaurant, coffee shop, bar or grocery store.
  • No lift gate fees
  • Available financing for purchases over $1,000
  • No lofty down payments required (so you can start cooking today)
  • And no overhead or middleman to cut into your savings

Commercial Refrigeration

Every Atosa freezer and refrigerator is made with high-quality metals. They use advanced technologies and parts to improve performance. These advances result in shorter run times, lowered energy costs, and the coldest holding temperatures. The high-density, CFC-free polyurethane insulation makes these refrigerators very climate-friendly. They are some of the best on the market.

Each unit has a 100% full run test before leaving the factory. Prior to shipping, all units must pass an intense series of tests for a minimum run time of 24 hours. These tests include computer refrigerant charging and vacuum leak decay checks, helium leak detection, vibration noise level, visual examination and a temperature analysis.

Bottom line? These are some of the most trusted pieces of equipment on the market, and you won’t find these prices offered anywhere else. (Go ahead and do a search, we’ll wait…)

And if we’re totally honest, we don’t usually do business with the Michelin-star rated restaurants. We support the small startups, the hardworking food trucks, and the simple kitchens. They need to save money to focus on quality ingredients.

If that sounds like you, you’ve come to the right place.

You can start making money off of these products before even making your first payment. We offer free delivery. Our founder, Sean Kearney, is also here to help. You can reach him by email, phone, or text at any time.

Email customer service at therestaurantwarehouse@gmail.com. You can also call or text (206) 419-5801. Reach out with any questions, concerns, or for a hood quote. Otherwise, feel free to start shopping! We know you’ll find the right piece of equipment you’ve been looking for, and at a price you won’t find anywhere else.

New restaurant equipment can make opening and running your restaurant easier. This lets you focus on what really matters: the quality of the food. Whether you need a new kitchen stove or a commercial freezer, our equipment is made to last. It comes with a warranty and is ready to ship to you today.

Previous article Atosa Under-counter Ice Machine Installation
Next article Uncovering the Additional Expenses of Obsolete Commercial Kitchen Machinery

Leave a comment

Comments must be approved before appearing

* Required fields

About The Author

Sean Kearney

Sean Kearney

Sean Kearney used to work at Amazon.com and started The Restaurant Warehouse. He has more than 10 years of experience in restaurant equipment and supplies. He graduated from the University of Washington in 1993. He earned a BA in business and marketing. He also played linebacker for the Huskies football team. He helps restaurants find equipment at a fair price and offers financing options. You can connect with Sean on LinkedIn or Facebook.

Restaurant Equipment Blog Rosts

  • True Bar Refrigeration
    April 4, 2025 Sean Kearney

    TBR/TDR Series | True Bar and Draft Refrigeration

    Ensure that your bar is equipped with the perfect solution for keeping beer bottles chilled and ready to serve. Introducing our range of horizontal bottle coolers, designed specifically to meet the needs of bars and restaurants. These coolers are not...

    Read now
  • Craft Beer
    April 3, 2025 SEAN KEARNEY

    Craft Beer

    Immerse your restaurant guests in the joy of enjoying the perfect bite paired with a refreshing pint, artfully brewed with love and commitment. Craft beer is more than just a drink; it is a form of artistic expression. Made with...

    Read now

Commercial Refrigeration

Shop Restaurant Equipment