Atosa ACHP-6-NG 36-Inch 6 Burner Countertop Hot Plate, Natural Gas, 192,000 BTU

Atosa ACHP-6-NG 36-Inch 6 Burner Countertop Hot Plate, Natural Gas, 192,000 BTU

The Atosa ACHP-6-NG is a 36" countertop hot plate with 6 burners and 192,000 BTU on natural gas. Each burner has its own manual control, and the grates are heavy-duty cast iron.

At a Glance

• Size: 36" W x 27-3/5" D x 13-1/10" H
• Burners: 6 at 32,000 BTU each, 192,000 BTU total, natural gas
• Controls: independent manual control for each burner
• Grates: heavy-duty cast iron
• Crumb tray: full width, stainless steel
• Certifications: cETLus, ETL-Sanitation
• Warranty: 1 year parts and labor (US only)

Most units ship within one business day from our warehouse with free freight to the lower 48.

A 36" Gas Countertop Range

This gas countertop range is 36" wide with six 32,000 BTU burners and 192,000 BTU in total. Each burner has its own manual control, and it runs on natural gas.

Is the ACHP-6-NG the Right Hot Plate for Your Kitchen?

The ACHP-6-NG puts six 32,000 BTU open burners, 192,000 BTU in total, on 36" of counter. Every burner has its own valve and standing pilot, so you can run one pan at a simmer and the next at full flame.

Plan for 48" of counter width: Atosa's manual calls for at least 6" of clearance on both sides and the back. It weighs 134 lb, or 180 lb shipped. At 27-3/5" deep, it matches the depth of Atosa's ATRC charbroilers, so it can sit in the same counter run.

Need an oven too? The AGR-6B-NG range has burners with an oven base. For one heavy stock pot instead of six pans, see the ATSP-18-1-NG stock pot stove.

Good For

• High-volume restaurants: six burners and 192,000 BTU on a 36" counter
• Pasta and sauté stations: six pans going at once
• Institutional kitchens: soups and sides in volume
• Kitchens with an existing oven: burners on the counter, oven elsewhere

Built for Daily Commercial Use

• Stainless steel exterior and interior
• Stainless steel full width crumb tray
• 32,000 BTU heavy-duty burners with a standing pilot
• Heavy-duty cast iron top grates
• Independent manual controls for each burner
• Stainless steel legs standard
• 3/4" NPT rear gas connection and regulator standard

Pick the Right Size

Need propane? See the Atosa ACHP-6-LP. Want an oven under the burners? See the Atosa AGR-6B-NG.

Shop all commercial charbroilers, broilers and hot plates.

Specifications

Before You Order

• This is the natural gas model. Order the ACHP-6-LP for propane.
• Gas: 3/4" NPT rear connection with a regulator. Atosa lists the regulator at 4" W.C. for natural gas.
• Check your counter: the ACHP-6-NG is 36" wide, 27-3/5" deep and 13-1/10" tall. It weighs 134 lb. With Atosa's side clearances, plan for 48" of counter width.
• Atosa's manual says to set it on a non-combustible counter, leave at least 6" on both sides and the back and 4" below, and install it under an exhaust hood as local code requires.
• Atosa's manual says an authorized, licensed technician must install it, and that it is not for outdoor use.
• Atosa's manual says switching gas type means changing the burner nozzles and the regulator, and that only an authorized, licensed technician should do it.

Setup and Care

• Atosa says to wipe it with a mild detergent before the first use.
• Atosa says to preheat the burners for 15 to 20 minutes, then set the flame for what you are cooking.
• Expect some smoke the first time you heat it. Atosa says it goes away after running at full heat for about an hour.
• Atosa says to empty and wipe the crumb tray after each use, once the unit cools.
• Atosa says not to hose down or pressure wash it (the crumb tray is the exception), and not to use abrasive or corrosive cleaners.
• Atosa says to have it checked once a year by an authorized, licensed technician.

Atosa ACHP-6-NG FAQ

What size is the Atosa ACHP-6-NG?

36" wide, 27-3/5" deep and 13-1/10" tall. It weighs 134 lb, or 180 lb shipped. With 6" clearance on each side, plan for 48" of counter width.

How many BTU is the ACHP-6-NG?

192,000 BTU on natural gas: six burners at 32,000 BTU each.

Can I control each burner on the ACHP-6-NG separately?

Yes. All six burners have their own manual valve and standing pilot.

What gas connection does the ACHP-6-NG need?

A 3/4" NPT rear connection with the included regulator, set at 4" W.C. for natural gas. Atosa's manual lists NG37 burner nozzles for natural gas.

How much space does the ACHP-6-NG need around it?

Atosa's manual says at least 6" on both sides and the back, and 4" below, on a non-combustible counter. For the 36" ACHP-6-NG, that means 48" of counter width.

Can I use the ACHP-6-NG outdoors?

No. Atosa's manual says it is not for outdoor use and must go under an exhaust hood as local code requires.

Can I get the ACHP-6-NG in propane?

Yes. The ACHP-6-LP has the same six burners and 192,000 BTU on propane, with a 10" W.C. regulator.

What certifications does the ACHP-6-NG have?

cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b.

What warranty comes with the ACHP-6-NG?

1 year parts and labor (US only) on the ACHP-6-NG.

Should I get the ACHP-6-NG or a range with an oven?

Get the ACHP-6-NG if you already have oven space or just need more burners: it is 134 lb and sits on a counter. If you need an oven too, the AGR-6B-NG range puts burners over an oven base.

Spec Sheet and Manual

Download the Atosa ACHP-6-NG spec sheet (PDF)

Download the Atosa ACHP hot plate manual (PDF)