Atosa ACHP-2-NG 12-Inch 2 Burner Countertop Hot Plate, Natural Gas, 64,000 BTU

Atosa ACHP-2-NG 12-Inch 2 Burner Countertop Hot Plate, Natural Gas, 64,000 BTU

The Atosa ACHP-2-NG is a 12" countertop hot plate with 2 burners and 64,000 BTU on natural gas. Each burner has its own manual control, and the grates are heavy-duty cast iron.

At a Glance

• Size: 12" W x 27-3/5" D x 13-1/10" H
• Burners: 2 at 32,000 BTU each, 64,000 BTU total, natural gas
• Controls: independent manual control for each burner
• Grates: heavy-duty cast iron
• Crumb tray: full width, stainless steel
• Certifications: cETLus, ETL-Sanitation
• Warranty: 1 year parts and labor (US only)

Most units ship within one business day from our warehouse with free freight to the lower 48.

A 12" 2 Burner Hot Plate

This 2 burner hot plate is 12" wide with two 32,000 BTU burners and 64,000 BTU in total. Each burner has its own manual control and a standing pilot, and the top grates are heavy-duty cast iron. It runs on natural gas.

Is the ACHP-2-NG the Right Hot Plate for Your Kitchen?

The ACHP-2-NG puts two 32,000 BTU open burners, 64,000 BTU in total, on 12" of counter. Every burner has its own valve and standing pilot, so you can run one pan at a simmer and the next at full flame.

Plan for 24" of counter width: Atosa's manual calls for at least 6" of clearance on both sides and the back. It weighs 54 lb, or 74 lb shipped. At 27-3/5" deep, it matches the depth of Atosa's ATRC charbroilers, so it can sit in the same counter run.

Need more burners? The ACHP-4-NG doubles it to four in 24". Want two more burners? The ACHP-4-NG is 24" wide.

Good For

• Sauce and soup stations: two burners on a 12" footprint
• Cafes and coffee shops: a small burner station with no full range
• Added burners on a line: fits beside a griddle or charbroiler
• Prep areas: blanching, reductions and stocks off the main range

Built for Daily Commercial Use

• Stainless steel exterior and interior
• Stainless steel full width crumb tray
• 32,000 BTU heavy-duty burners with a standing pilot
• Heavy-duty cast iron top grates
• Independent manual controls for each burner
• Stainless steel legs standard
• 3/4" NPT rear gas connection and regulator standard

Pick the Right Size

Need propane? See the Atosa ACHP-2-LP. Want an oven under the burners? See the Atosa AGR-4B-NG.

Shop all commercial charbroilers, broilers and hot plates.

Specifications

Before You Order

• This is the natural gas model. Order the ACHP-2-LP for propane.
• Gas: 3/4" NPT rear connection with a regulator. Atosa lists the regulator at 4" W.C. for natural gas.
• Check your counter: the ACHP-2-NG is 12" wide, 27-3/5" deep and 13-1/10" tall. It weighs 54 lb. With Atosa's side clearances, plan for 24" of counter width.
• Atosa's manual says to set it on a non-combustible counter, leave at least 6" on both sides and the back and 4" below, and install it under an exhaust hood as local code requires.
• Atosa's manual says an authorized, licensed technician must install it, and that it is not for outdoor use.
• Atosa's manual says switching gas type means changing the burner nozzles and the regulator, and that only an authorized, licensed technician should do it.

Setup and Care

• Atosa says to wipe it with a mild detergent before the first use.
• Atosa says to preheat the burners for 15 to 20 minutes, then set the flame for what you are cooking.
• Expect some smoke the first time you heat it. Atosa says it goes away after running at full heat for about an hour.
• Atosa says to empty and wipe the crumb tray after each use, once the unit cools.
• Atosa says not to hose down or pressure wash it (the crumb tray is the exception), and not to use abrasive or corrosive cleaners.
• Atosa says to have it checked once a year by an authorized, licensed technician.

Atosa ACHP-2-NG FAQ

What size is the Atosa ACHP-2-NG?

12" wide, 27-3/5" deep and 13-1/10" tall. It weighs 54 lb, or 74 lb shipped. With 6" clearance on each side, plan for 24" of counter width.

How many BTU is the ACHP-2-NG?

64,000 BTU on natural gas: two burners at 32,000 BTU each.

Can I control each burner on the ACHP-2-NG separately?

Yes. All two burners have their own manual valve and standing pilot.

What gas connection does the ACHP-2-NG need?

A 3/4" NPT rear connection with the included regulator, set at 4" W.C. for natural gas. Atosa's manual lists NG37 burner nozzles for natural gas.

How much space does the ACHP-2-NG need around it?

Atosa's manual says at least 6" on both sides and the back, and 4" below, on a non-combustible counter. For the 12" ACHP-2-NG, that means 24" of counter width.

Can I use the ACHP-2-NG outdoors?

No. Atosa's manual says it is not for outdoor use and must go under an exhaust hood as local code requires.

Can I get the ACHP-2-NG in propane?

Yes. The ACHP-2-LP has the same two burners and 64,000 BTU on propane, with a 10" W.C. regulator.

What certifications does the ACHP-2-NG have?

cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b.

What warranty comes with the ACHP-2-NG?

1 year parts and labor (US only) on the ACHP-2-NG.

Is a 2 burner hot plate enough?

For a sauce or soup station, or to add burners beside a griddle, two 32,000 BTU burners in 12" is often enough. If you run more than two pans at once, the ACHP-4-NG has four in 24".

Spec Sheet and Manual

Download the Atosa ACHP-2-NG spec sheet (PDF)

Download the Atosa ACHP hot plate manual (PDF)