Atosa MPF8203GR 93-Inch Three Door Pizza Prep Table, 12 Pans, 28.4 cu. ft.
Atosa MPF8203GR 93-Inch Three Door Pizza Prep Table, 12 Pans, 28.4 cu. ft.
The Atosa MPF8203GR is a 93-inch three-door refrigerated pizza prep table for high-volume pizza kitchens. Twelve included 1/3-size topping pans and a 19-1/4-inch-deep cutting board support a longer make line, while three refrigerated door sections provide 28.4 cu. ft. of backup ingredient storage at 35°F to 38°F.
At a Glance
- Size: 93-1/8" W x 34-1/8" D x 43-1/8" H
- Pans: (12) 1/3 size stainless steel pans
- Cutting board: 19-1/4" deep
- Storage below: 28.4 cu. ft., (6) shelves, two per section, three doors
- Temperature: 35°F to 38°F
- Power: 115V, 3.1 amps, standard plug (NEMA 5-15P)
- Warranty: 3 years parts and labor, 5 years compressor
Most units ship within one business day from our warehouse with free freight to the lower 48.
A 93 Inch Pizza Prep Table
For pizzerias with extensive topping menus or multiple staff preparing orders, the three-door configuration separates refrigerated backup storage across six shelves. At 93-1/8 inches wide, it offers the most pan positions and base capacity in this MPF series; confirm the space available along the pizza make line before ordering.
93-Inch Three-Door Pizza Prep Table for High-Volume Kitchens
The MPF8203GR supports long pizza assembly lines in busy pizzerias and commissary kitchens. Twelve 1/3-size topping pans and 28.4 cu. ft. of refrigerated storage behind three doors give teams room for extensive topping menus and backup ingredients.
Best fit: larger kitchen footprints, high-volume pizza preparation, and operators who need maximum storage capacity in this three-model MPF family.
Compare MPF Pizza Prep Table Sizes
The 67-inch MPF8202GR offers nine pans and two doors for a smaller pizza line. The 93-inch MPF8203GR adds three pan positions and 9.9 cu. ft. of base capacity. The 44-inch MPF8201GR remains the compact choice.
Built for Daily Commercial Use
- Stainless steel inside and out
- Side mount compressor with R290, a natural refrigerant
- Electronic temperature controller
- Stainless steel 1/3 size pans included
- 19-1/4" deep cutting board
- Self-closing doors with a stay-open feature
- Recessed door handles and magnetic door gaskets
- Two pre-installed epoxy coated shelves per section
- Pre-installed 5" casters
Add-Ons
- Pizza prep table shelf: MROS-93P mounts above the pans for extra storage
- Drawer kits: MPF8205227000 (left or right door) and MPF8205227001 (middle door) swap a door for two drawers, installed in the field
- Extra shelves: W0402573 (left and right sections) and W0402572 (middle section), each with 4 shelf clips
Pick the Right Size
| Model | Doors | Width | Pans | Capacity |
|---|---|---|---|---|
| MPF8201GR | 1 | 44-1/8" | (6) 1/3 | 9.7 cu. ft. |
| MPF8202GR | 2 | 67-1/8" | (9) 1/3 | 18.5 cu. ft. |
| MPF8203GR (this model) | 3 | 93-1/8" | (12) 1/3 | 28.4 cu. ft. |
Need a different size? Shop all pizza prep tables or see the sandwich prep tables.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Pizza Prep Table, three doors |
| Pans | (12) 1/3 size stainless steel pans |
| Cutting board | 19-1/4" deep |
| Capacity | 28.4 cu. ft. |
| Shelves | (6) shelves, two per section |
| Exterior dimensions | 93-1/8" W x 34-1/8" D x 43-1/8" H |
| Temperature range | 35°F to 38°F |
| Temperature control | Electronic |
| Compressor | 1/4 HP, side mount |
| Refrigerant | R290 |
| Construction | Stainless steel interior and exterior |
| Casters | 5", pre-installed |
| Electrical | 115V / 60Hz / 1-phase, 3.1 amps |
| Plug | NEMA 5-15P |
| Net weight | 428 lb |
| Shipping weight | 527 lb |
| Warranty | 3-year parts and labor, 5-year compressor |
| Certifications | cETLus, ETL-Sanitation |
Before You Order
- Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
- Check your space: the unit is 93-1/8" wide, 34-1/8" deep and 43-1/8" tall.
- Leave the unit some room to breathe and clean the condenser often, as Atosa advises.
Atosa MPF8203GR FAQ
Why choose a 93-inch three-door pizza prep table?
Its twelve-pan rail, longer assembly surface, and 28.4 cu. ft. three-door base accommodate more toppings and refrigerated backup ingredients than the smaller MPF models.
What size is the Atosa MPF8203GR?
The MPF8203GR is 93-1/8" wide, 34-1/8" deep and 43-1/8" tall. It weighs 428 lb (527 lb shipping weight).
How many pans does the MPF8203GR hold?
It comes with (12) 1/3 size stainless steel pans.
What temperature does the MPF8203GR hold?
It holds 35°F to 38°F with an electronic temperature controller.
How much storage is under the MPF8203GR?
It has 28.4 cu. ft. behind three doors, with (6) shelves, two per section.
How is a pizza prep table different from a sandwich prep table?
A pizza prep table has a deeper cutting board for rolling and topping dough, 19-1/4" on this model. It holds larger 1/3 size pans instead of 1/6 size pans.
Can I add drawers to the MPF8203GR?
Yes. Atosa makes a drawer kit that fits this model. It replaces a door with two drawers, and it installs in the field.
What power does the MPF8203GR need?
It runs on 115V and draws 3.1 amps. It has a standard NEMA 5-15P plug, so it plugs into a regular 115V outlet.
How often should I clean the MPF8203GR condenser?
Atosa says to clean the condenser frequently. Pull the unit out on its casters, vacuum the condenser coil, and brush off any dust or grease. A clean condenser helps the prep table hold temperature.
What warranty comes with the MPF8203GR?
3 years parts and labor and 5 years on the compressor.
Spec Sheet
Download the Atosa MPF8203GR spec sheet (PDF, Rev. 07/26)
OEM Parts We Stock for the MPF8203GR
The Restaurant Warehouse stocks genuine Atosa replacement parts for the MPF8203GR prep table, including the W0302316 probe, the W0308019 rocker switch, the W0409843 sleeve, the W0409842 sleeve/bushing, and the W0204003 filter drier. Explore the full Atosa parts hub or view the operating instructions for service procedures.
MPF8203GR Parts & Service
The MPF8203GR parts page lists genuine OEM Atosa replacement parts compatible with this unit. Additional service components are available in our Atosa parts collection, and the parts department guide covers ordering and warranty details.