Atosa MBC65GR 65-Inch Horizontal Bottle Cooler, Two Lids, 16.4 cu. ft.
Atosa MBC65GR 65-Inch Horizontal Bottle Cooler, Two Lids, 16.4 cu. ft.
The Atosa MBC65GR is a 64-3/4" wide horizontal bottle cooler with two sliding lids. It holds 16.4 cu. ft. at 35°F to 38°F, and it plugs into a standard 115V outlet.
At a Glance
- Size: 64-3/4" W x 26-3/4" D x 38-1/2" H
- Storage: 16.4 cu. ft., (4) wire dividers
- Lids: 2 sliding stainless steel lids with handles and locks
- Extras: Bottle opener and cap catcher
- Temperature: 35°F to 38°F
- Power: 115V, 2.3 amps, standard plug (NEMA 5-15P)
- Warranty: 3 years parts and labor, 5 years compressor
Most units ship within one business day from our warehouse with free freight to the lower 48.
A Commercial Drink Cooler
This commercial drink cooler holds 16.4 cu. ft. of bottled beer, soda and mixers. Staff reach in from the top, grab a bottle, and open it on the built-in opener.
65-Inch Bottle Cooler for Bar Beverage Service
The Atosa MBC65GR provides 16.4 cu. ft. of refrigerated bottle storage in a 65-inch cabinet. This bottle-cooler configuration keeps packaged beverages close to bartenders during high-volume service.
Compare cabinet width and bottle capacity with other MBC models to match peak beverage demand. Confirm floor space, lid-opening clearance, and electrical requirements before ordering.
Built for Daily Commercial Use
- Stainless steel inside and out
- Heavy duty Embraco compressor with R290, a natural refrigerant
- Slide out compressor assembly for easy service
- Electronic temperature controller
- Easy glide stainless steel lids with handles
- Lid locks standard
- Bottle opener and cap catcher standard
- Wire dividers standard
- Pre-installed 2" casters
Pick the Right Size
| Model | Width | Lids | Capacity | Dividers |
|---|---|---|---|---|
| MBC24GR | 24-3/8" | 1 | 4 cu. ft. | 2 |
| MBC36GR | 36-3/4" | 1 | 7.7 cu. ft. | 2 |
| MBC50GR | 49-3/8" | 2 | 11.7 cu. ft. | 3 |
| MBC65GR (this model) | 64-3/4" | 2 | 16.4 cu. ft. | 4 |
| MBC80GR | 80-1/2" | 3 | 21.2 cu. ft. | 5 |
Shop all commercial bottle coolers or our bar refrigeration.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Horizontal bottle cooler, top load, two lids |
| Lids | 2 sliding stainless steel lids with handles, locks standard |
| Capacity | 16.4 cu. ft. |
| Wire dividers | 4 |
| Exterior dimensions | 64-3/4" W x 26-3/4" D x 38-1/2" H |
| Temperature range | 35°F to 38°F |
| Temperature control | Electronic |
| Compressor | 1/7 HP Embraco, slide out assembly |
| Refrigerant | R290 |
| Construction | Stainless steel interior and exterior |
| Extras | Bottle opener and cap catcher |
| Casters | 2", pre-installed |
| Electrical | 115V / 60Hz / 1-phase, 2.3 amps |
| Plug | NEMA 5-15P |
| Net weight | 205 lb |
| Shipping weight | 278 lb |
| Warranty | 3-year parts and labor, 5-year compressor |
| Certifications | cETLus, ETL-Sanitation |
Before You Order
- Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
- Check your space: the unit is 64-3/4" wide, 26-3/4" deep and 38-1/2" tall.
- It loads from the top, so leave clear space above it for staff to reach in.
- Leave the unit some room to breathe and clean the condenser often, as Atosa advises.
Atosa MBC65GR FAQ
What size is the Atosa MBC65GR?
The MBC65GR is 64-3/4" wide, 26-3/4" deep and 38-1/2" tall. It weighs 205 lb (278 lb shipping weight).
How much does the MBC65GR hold?
It holds 16.4 cu. ft. It comes with (4) wire dividers to help sort bottles.
What temperature does the MBC65GR hold?
It holds 35°F to 38°F with an electronic temperature controller.
Does the MBC65GR lock?
Yes. Lid locks are standard.
Does the MBC65GR have a bottle opener?
Yes. A bottle opener and cap catcher come standard on the front.
What power does the MBC65GR need?
It runs on 115V and draws 2.3 amps. It has a standard NEMA 5-15P plug, so it plugs into a regular 115V outlet.
How often should I clean the MBC65GR condenser?
Atosa says to clean the condenser frequently and to leave the unit some room to breathe. A clean condenser helps the unit hold temperature.
What warranty comes with the MBC65GR?
3 years parts and labor and 5 years on the compressor.
Spec Sheet
Download the Atosa MBC65GR spec sheet (PDF, Rev. 07/26)
Service Parts for the MBC65GR Refrigerator
Extend the service life of your MBC65GR with factory OEM replacement parts. In-stock service components include the W0301112 fan motor, the W0308019 rocker switch, the W0604007 lock kit with keys, the W0399116 power supply, and the W0401025 handle. Browse related Atosa replacement parts or reference the Atosa parts department guide for warranty and ordering information.