Atosa MBC50GR 50-Inch Horizontal Bottle Cooler, Two Lids, 11.7 cu. ft.
Atosa MBC50GR 50-Inch Horizontal Bottle Cooler, Two Lids, 11.7 cu. ft.
The Atosa MBC50GR is a 49-3/8" wide horizontal bottle cooler with two sliding lids. It holds 11.7 cu. ft. at 35°F to 38°F, and it plugs into a standard 115V outlet.
At a Glance
- Size: 49-3/8" W x 26-3/4" D x 38-1/2" H
- Storage: 11.7 cu. ft., (3) wire dividers
- Lids: 2 sliding stainless steel lids with handles and locks
- Extras: Bottle opener and cap catcher
- Temperature: 35°F to 38°F
- Power: 115V, 2.3 amps, standard plug (NEMA 5-15P)
- Warranty: 3 years parts and labor, 5 years compressor
Most units ship within one business day from our warehouse with free freight to the lower 48.
A 50 Inch Bottle Cooler
This 50 inch bottle cooler holds 11.7 cu. ft. under two sliding lids. Three wire dividers help you keep each brand in its own spot.
50-Inch Bottle Cooler for Bar Beverage Service
The Atosa MBC50GR provides 11.7 cu. ft. of refrigerated bottle storage in a 50-inch cabinet. This bottle-cooler configuration keeps packaged beverages close to bartenders during high-volume service.
Compare cabinet width and bottle capacity with other MBC models to match peak beverage demand. Confirm floor space, lid-opening clearance, and electrical requirements before ordering.
Built for Daily Commercial Use
- Stainless steel inside and out
- Heavy duty Embraco compressor with R290, a natural refrigerant
- Slide out compressor assembly for easy service
- Electronic temperature controller
- Easy glide stainless steel lids with handles
- Lid locks standard
- Bottle opener and cap catcher standard
- Wire dividers standard
- Pre-installed 2" casters
Pick the Right Size
| Model | Width | Lids | Capacity | Dividers |
|---|---|---|---|---|
| MBC24GR | 24-3/8" | 1 | 4 cu. ft. | 2 |
| MBC36GR | 36-3/4" | 1 | 7.7 cu. ft. | 2 |
| MBC50GR (this model) | 49-3/8" | 2 | 11.7 cu. ft. | 3 |
| MBC65GR | 64-3/4" | 2 | 16.4 cu. ft. | 4 |
| MBC80GR | 80-1/2" | 3 | 21.2 cu. ft. | 5 |
Shop all commercial bottle coolers or our bar refrigeration.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Horizontal bottle cooler, top load, two lids |
| Lids | 2 sliding stainless steel lids with handles, locks standard |
| Capacity | 11.7 cu. ft. |
| Wire dividers | 3 |
| Exterior dimensions | 49-3/8" W x 26-3/4" D x 38-1/2" H |
| Temperature range | 35°F to 38°F |
| Temperature control | Electronic |
| Compressor | 1/7 HP Embraco, slide out assembly |
| Refrigerant | R290 |
| Construction | Stainless steel interior and exterior |
| Extras | Bottle opener and cap catcher |
| Casters | 2", pre-installed |
| Electrical | 115V / 60Hz / 1-phase, 2.3 amps |
| Plug | NEMA 5-15P |
| Net weight | 176 lb |
| Shipping weight | 236 lb |
| Warranty | 3-year parts and labor, 5-year compressor |
| Certifications | cETLus, ETL-Sanitation |
Before You Order
- Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
- Check your space: the unit is 49-3/8" wide, 26-3/4" deep and 38-1/2" tall.
- It loads from the top, so leave clear space above it for staff to reach in.
- Leave the unit some room to breathe and clean the condenser often, as Atosa advises.
Atosa MBC50GR FAQ
What size is the Atosa MBC50GR?
The MBC50GR is 49-3/8" wide, 26-3/4" deep and 38-1/2" tall. It weighs 176 lb (236 lb shipping weight).
How much does the MBC50GR hold?
It holds 11.7 cu. ft. It comes with (3) wire dividers to help sort bottles.
What temperature does the MBC50GR hold?
It holds 35°F to 38°F with an electronic temperature controller.
Does the MBC50GR lock?
Yes. Lid locks are standard.
Does the MBC50GR have a bottle opener?
Yes. A bottle opener and cap catcher come standard on the front.
What is a horizontal bottle cooler?
A horizontal bottle cooler is a low cooler that opens from the top. Staff slide the lid back and reach in for a bottle. It keeps bottled beer and soda cold right behind the bar.
What power does the MBC50GR need?
It runs on 115V and draws 2.3 amps. It has a standard NEMA 5-15P plug, so it plugs into a regular 115V outlet.
How often should I clean the MBC50GR condenser?
Atosa says to clean the condenser frequently and to leave the unit some room to breathe. A clean condenser helps the unit hold temperature.
What warranty comes with the MBC50GR?
3 years parts and labor and 5 years on the compressor.
Spec Sheet
Download the Atosa MBC50GR spec sheet (PDF, Rev. 07/26)
Service Parts for the MBC50GR Refrigerator
Extend the service life of your MBC50GR with factory OEM replacement parts. In-stock service components include the W0301112 fan motor, the W0308019 rocker switch, the W0604007 lock kit with keys, the W0399116 power supply, and the W0401025 handle. Browse related Atosa replacement parts or reference the Atosa parts department guide for warranty and ordering information.