Atosa MBC24GR 24-Inch Horizontal Bottle Cooler, One Lid, 4 cu. ft.

Atosa MBC24GR 24-Inch Horizontal Bottle Cooler, One Lid, 4 cu. ft.

The Atosa MBC24GR is a 24-3/8" wide horizontal bottle cooler with one sliding lid. It holds 4 cu. ft. at 35°F to 38°F, and it plugs into a standard 115V outlet.

At a Glance

• Size: 24-3/8" W x 26-3/4" D x 38-1/2" H
• Storage: 4 cu. ft., (2) wire dividers
• Lids: 1 sliding stainless steel lid with handle and lock
• Extras: Bottle opener and cap catcher
• Temperature: 35°F to 38°F
• Power: 115V, 2.3 amps, standard plug (NEMA 5-15P)
• Warranty: 3 years parts and labor, 5 years compressor

Most units ship within one business day from our warehouse with free freight to the lower 48.

A Small Bottle Cooler

This small bottle cooler is the narrowest in the line, at 24-3/8" wide. It loads from the top, holds 4 cu. ft., and fits at the end of a bar or beside a sink.

24-Inch Bottle Cooler for Busy Bar Service

The Atosa MBC24GR provides 4 cu. ft. of refrigerated bottle storage in a 24-inch cabinet. Its bottle-cooler layout suits bartenders who need to replenish bottled drinks quickly during service.

Compare this cabinet width and bottle storage volume with other MBC sizes, and confirm the available floor space and lid-opening clearance before ordering.

Built for Daily Commercial Use

• Stainless steel inside and out
• Heavy duty Embraco compressor with R290, a natural refrigerant
• Slide out compressor assembly for easy service
• Electronic temperature controller
• Easy glide stainless steel lid with handle
• Lid lock standard
• Bottle opener and cap catcher standard
• Wire dividers standard
• Pre-installed 2" casters

Pick the Right Size

Shop all commercial bottle coolers or our bar refrigeration.

Specifications

Before You Order

• Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
• Check your space: the unit is 24-3/8" wide, 26-3/4" deep and 38-1/2" tall.
• It loads from the top, so leave clear space above it for staff to reach in.
• Leave the unit some room to breathe and clean the condenser often, as Atosa advises.

Atosa MBC24GR FAQ

What size is the Atosa MBC24GR?

The MBC24GR is 24-3/8" wide, 26-3/4" deep and 38-1/2" tall. It weighs 170 lb (207 lb shipping weight).

How much does the MBC24GR hold?

It holds 4 cu. ft. It comes with (2) wire dividers to help sort bottles.

What temperature does the MBC24GR hold?

It holds 35°F to 38°F with an electronic temperature controller.

Does the MBC24GR lock?

Yes. Lid lock is standard.

Does the MBC24GR have a bottle opener?

Yes. A bottle opener and cap catcher come standard on the front.

What power does the MBC24GR need?

It runs on 115V and draws 2.3 amps. It has a standard NEMA 5-15P plug, so it plugs into a regular 115V outlet.

How often should I clean the MBC24GR condenser?

Atosa says to clean the condenser frequently and to leave the unit some room to breathe. A clean condenser helps the unit hold temperature.

What warranty comes with the MBC24GR?

3 years parts and labor and 5 years on the compressor.

Spec Sheet

Download the Atosa MBC24GR spec sheet (PDF, Rev. 07/26)