Skip to content
Learn more in our commercial freezers guide.
Learn more in our commercial freezers guide.

Atosa MBF8007GR 29-Inch Two Half Door Commercial Reach-In Freezer, 21.4 cu. ft.

by Atosa
Save 28% Save 28%
Original price $3,680.00
Original price $3,680.00 - Original price $3,680.00
Original price $3,680.00
Current price $2,652.00
$2,652.00 - $2,652.00
Current price $2,652.00

Atosa MBF8007GR 29-Inch Two Half Door Commercial Reach-In Freezer, 21.4 cu. ft.

The Atosa MBF8007GR is a two half door commercial reach-in freezer with a top mount compressor. It holds 21.4 cu. ft. at -8°F to 0°F and plugs into a standard 115V outlet.

Two half doors split the cabinet into a top and a bottom opening, so staff only open the half they need. The top mount compressor keeps the working parts up and away from floor dust and grease. Need the doors to swing the other way? See the MBF8007GRL.

Need a different size? Shop all commercial freezers or compare reach-in freezers.

Most units ship within one business day from our warehouse with free freight to the lower 48.

A Half Door Freezer for Busy Kitchens

The Atosa MBF8007GR is a two half door commercial freezer with 21.4 cu. ft. of frozen storage. Its upper and lower doors open separately, letting staff access one half of this top mount reach in freezer without opening the entire cabinet. This half door reach in freezer is useful for busy kitchens that frequently retrieve smaller amounts of frozen ingredients.

Where the Right-Hinge MBF8007GR Fits Best

  • A right wall or corner: the door opens against the wall and stays out of your walkway
  • Work area on the left: you reach in from the left side, right beside your prep table or line
  • Side-by-side units: place it to the right of the MBF8007GRL so both doors swing open away from each other
  • Restaurant kitchens: frozen proteins, fries and prepared foods

Why Kitchens Choose the MBF8007GR

  • 21.4 cu. ft. in a 28-3/4" wide cabinet
  • Holds -8°F to 0°F for meat, seafood, fries, desserts and prepared foods
  • Two locking solid half doors (right-hinged)
  • 3 shelves and LED interior lighting
  • ENERGY STAR® certified
  • 3-year parts and labor and 5-year compressor warranty

Cooling and Controls

A 1/2 HP compressor runs on R290, a natural refrigerant. An electronic temperature controller holds -8°F to 0°F, and down duct airflow spreads cold air evenly from top to bottom. Automatic evaporation takes care of condensate water for you. It is a self-contained, plug-in unit.

Built for Daily Commercial Use

The inside and outside are stainless steel, and the back is galvanized steel. The half doors close on their own and have a stay-open feature, which makes loading easier. Every door locks, the handles are recessed, and magnetic gaskets seal each door. It rolls on pre-installed 4" casters, so you can pull it out to clean behind it.

Why Top Mount?

On this freezer the compressor sits on top of the cabinet, up and away from floor dust, grease and mop water. Prefer the compressor on the bottom? See our bottom mount freezers.

Pick the Right Model

Model Doors Width Capacity Note
MBF8007GR (this model) 2 half doors 28-3/4" 21.4 cu. ft. Right hinge
MBF8007GRL 2 half doors 28-3/4" 21.4 cu. ft. Left hinge
MBF8008GR 4 half doors 51-3/4" 43.2 cu. ft. Two sections
MBF8001GR 1 full door 28-7/10" 21.4 cu. ft. Full door version
MBF8021GR 1 door, 2 drawers 28-3/4" 21.4 cu. ft. Pans in the drawers

Need the same cabinet for refrigerated food? See the matching Atosa MBF8010GR half door refrigerator.

Specifications

Spec Detail
Configuration Commercial reach-in freezer, one-section, top mount
Doors (2) locking solid half doors (right-hinged), self-closing with stay-open feature
Capacity 21.4 cu. ft.
Shelves (3) shelves
Exterior dimensions 28-3/4" W x 31-1/2" D x 81-1/4" H
Temperature range -8°F to 0°F
Temperature control Electronic
Refrigerant R290 hydrocarbon
Compressor 1/2 HP
Airflow Down duct
Condensate Automatic evaporation
Lighting LED interior
Construction Stainless steel interior and exterior, galvanized steel back
Casters 4", pre-installed
Electrical 115V / 60Hz / 1-phase, 6.3 amps
Plug NEMA 5-15P
Net weight 254 lb
Shipping weight 287 lb
Extra shelf W0402389 (each includes 4 shelf clips)
Warranty 3-year parts and labor, 5-year compressor
Certifications cETLus, ETL-Sanitation, ENERGY STAR®

Installation and Care

Set the freezer on a level floor near a standard 115V outlet with a NEMA 5-15 receptacle. Leave the unit some room to breathe so the compressor gets fresh air, and clean the condenser often. Extra shelves are Atosa part W0402389, and each comes with 4 shelf clips.

Atosa MBF8007GR FAQ

What size is the Atosa MBF8007GR?

The MBF8007GR is 28-3/4" wide, 31-1/2" deep and 81-1/4" tall. It weighs 254 lb (287 lb shipping weight).

How much does the MBF8007GR hold?

It holds 21.4 cu. ft. and comes with 3 shelves.

What temperature does the MBF8007GR hold?

It holds -8°F to 0°F with an electronic temperature controller.

Why choose half doors on the MBF8007GR?

Each half door opens only part of the cabinet, so staff can reach the shelf they need without opening the whole front.

Is the MBF8007GR ENERGY STAR® certified?

Yes. It is ENERGY STAR® certified.

What power does the MBF8007GR need?

It runs on 115V / 60Hz / 1-phase and draws 6.3 amps. It has a NEMA 5-15P plug, so it plugs into a standard 115V outlet.

Can I add more shelves to the MBF8007GR?

Yes. Order Atosa shelf W0402389. Each extra shelf comes with 4 shelf clips.

How often should I clean the MBF8007GR condenser?

Atosa says to clean the condenser frequently. Pull the unit out on its casters, vacuum the condenser coil, and brush off any flour, dust or grease. A clean condenser helps the freezer hold temperature.

What warranty comes with the MBF8007GR?

3 years parts and labor and 5 years on the compressor.

Spec Sheet

Download the Atosa MBF8007GR spec sheet (PDF, Rev. 10/26)

Genuine Replacement Parts for the MBF8007GR

Keep your MBF8007GR freezer running like new with genuine OEM Atosa service parts. Common wear components we stock include the W0302317 temperature sensor/probe, the W0302184 controller for MBF8001, the W0301904 fan motor, the W0302316 probe, and the W04090871 absorbing paper assembly. Browse the complete Atosa parts catalog or reference the Atosa parts manuals for compatibility.

MBF8007GR Parts & Service

Need service parts for your Atosa MBF8007GR? Browse the MBF8007GR parts diagram and OEM replacement parts, view the full Atosa parts catalog, or download reference documentation from our Atosa parts manuals page.