Winco XLB-1000 Bar Maid 68 oz. Commercial Blender, 2 HP, Paddle Controls, 1450W
Winco XLB-1000 Bar Maid 68 oz. Commercial Blender, 2 HP, Paddle Controls, 1450W
The Winco XLB-1000 Bar Maid is a 2 HP, 1450 W commercial blender with a 68 oz. (2 liter) Tritan jug that Winco rates heat-resistant up to 226°F. PULSE and ON/OFF paddles plus a variable speed dial cover everything from frozen drinks to hot soups. An 11-1/2" tamper reaches the bottom of the jug.
At a Glance
- Motor: 2 HP, 1450 W
- Jug: 68 oz. (2 L) Tritan, heat-resistant to 226°F (108°C)
- Controls: PULSE and ON/OFF paddles, variable speed dial
- Tamper: 11-1/2", reaches full jug depth
- Drive: metal-to-metal coupling
- Draw: 12.1 amps on 120V
- Dimensions: 8-11/16" W x 9-13/16" D x 19-5/16" H
- Plug: NEMA 5-15P
- Listings: ETL electrical and sanitation, US and Canada
- Warranty: 1 year parts and labor
Blending Hot Soups and Sauces
Winco rates the XLB-1000 jug heat-resistant up to 226°F (108°C). Hot liquid builds pressure as it blends, so remove the cap in the lid to let steam out, start on low with the dial, and hold a towel over the lid opening. Hot soups, purees and sauces can go straight from the stove to the jug.
Plan a Circuit for 12.1 Amps
The XLB-1000 draws 12.1 amps on 120V. On a 15 amp circuit, that leaves little room for anything else, so don't share the outlet with a toaster, panini press or heat lamp.
68 oz. Batches and the Tamper
The 68 oz. jug makes about four 16 oz. smoothies per run. For thick frozen-fruit blends, the 11-1/2" tamper goes through the lid opening and pushes ingredients into the blades while the motor runs.
Features
- 68 oz. break-resistant, BPA-free Tritan jug
- Heat-resistant to 226°F (108°C); remove the lid cap to vent pressure
- 2 HP motor with high-impact stainless blades
- Metal-to-metal coupling
- PULSE and ON/OFF paddles with a variable speed dial
- 11-1/2" tamper that fits through the lid
- Dishwasher safe except the base and blade fixing block
- Blade removal tool included (Winco XLB1000P19)
XLB-1000 vs XLB-44
| Model | Jug | Motor | Watts | Controls | Tamper |
|---|---|---|---|---|---|
| XLB-44 | 44 oz. | 1/2 HP | 400 | HIGH/LOW switch | No |
| XLB-1000 (this model) | 68 oz. | 2 HP | 1450 | Paddles + speed dial | Yes |
The XLB-44 is the lighter-duty Bar Maid: 44 oz., 1/2 HP, a HIGH/LOW switch and only 3.5 amps. It suits simple bar drinks. The XLB-1000 is for thick smoothies, frozen fruit, hot blends and bigger batches.
See every model in our commercial blenders collection.
Specifications
| Spec | Detail |
|---|---|
| Model | XLB-1000 (Bar Maid) |
| Capacity | 68 oz. (2 liters) |
| Jug | BPA free Tritan, break resistant, heat resistant up to 226°F (108°C) |
| Motor | 2 HP |
| Controls | PULSE and ON/OFF paddles, variable speed dial |
| Coupling | Metal-to-metal |
| Tamper | 11-1/2", included |
| Overall size | 8-11/16" W x 9-13/16" D x 19-5/16" H |
| Jug size | 6-11/16" x 6-11/16" x 12-3/8" H |
| Voltage | 120V, 60 Hz |
| Watts | 1450 |
| Amps | 12.1 |
| Plug | NEMA 5-15P |
| Cord | Bottom of base, wraps to back right |
| Shipping weight | 10.36 lb |
| Listings | ETL listed for electrical safety and sanitation, US and Canada; conforms to UL-197 and CSA C22.2 |
| Warranty | 1 year parts and labor |
Replacement Parts
Winco part numbers for the XLB-1000:
| Part | What it is |
|---|---|
| XLB1000P1 | Rod set |
| XLB1000P2 | Pitcher assembly |
| XLB1000P4 | Refilling cap |
| XLB1000P5 | Blade assembly |
| XLB1000P10 | Mushroom head fitting |
| XLB1000P11 | 68 oz. pitcher |
| XLB1000P19 | Blade removal tool |
Before You Order
- Draws 12.1 amps on a 120V NEMA 5-15 outlet. Avoid sharing the circuit.
- It is 19-5/16" tall. Check shelf clearance.
- Vent the lid cap when blending hot ingredients.
Winco XLB-1000 FAQ
Can the XLB-1000 blend hot soup?
Winco rates the jug heat-resistant up to 226°F (108°C). Remove the cap in the lid to release pressure, and start at low speed.
How many amps does the XLB-1000 draw?
12.1 amps on 120V.
How many smoothies per XLB-1000 run?
The 68 oz. jug makes about four 16 oz. drinks.
What size tamper comes with the XLB-1000?
An 11-1/2" tamper that fits through the lid and reaches the full depth of the jug.
How powerful is the XLB-1000?
2 HP and 1450 watts, with a metal-to-metal coupling.
What controls are on the XLB-1000?
PULSE and ON/OFF paddles plus a variable speed dial.
Which XLB-1000 parts are dishwasher safe?
All parts except the base and the blade fixing block.
How big is the XLB-1000?
8-11/16" W x 9-13/16" D x 19-5/16" H.
What is the XLB-1000 replacement pitcher?
Winco part XLB1000P11 is the 68 oz. pitcher. XLB1000P2 is the pitcher assembly.
Is a blade removal tool included with the XLB-1000?
Yes, Winco part XLB1000P19.
Is the XLB-1000 ETL listed?
Yes. ETL listed for electrical safety and sanitation in the US and Canada, conforming to UL-197 and CSA C22.2.
What warranty comes with the XLB-1000?
1 year parts and labor from Winco.