Atosa SBB48GRAUS1 48-Inch Solid Door Shallow Back Bar Cooler, Stainless, 11.5 cu. ft.
Atosa SBB48GRAUS1 48-Inch Solid Door Shallow Back Bar Cooler, Stainless, 11.5 cu. ft.
The Atosa SBB48GRAUS1 is a 48" wide back bar cooler that is only 24-1/2" deep, with two solid doors and a stainless finish. It holds 11.5 cu. ft. at 35°F to 38°F, and it plugs into a standard 115V outlet.
At a Glance
- Size: 48" W x 24-1/2" D x 40-1/8" H
- Doors: 2 solid doors with locks, recessed handles
- Storage: 11.5 cu. ft., (4) epoxy coated shelves
- Temperature: 35°F to 38°F
- Finish: Stainless steel inside and out
- Power: 115V, 2.3 amps, standard plug (NEMA 5-15P)
- Warranty: 3 years parts and labor, 5 years compressor
Most units ship within one business day from our warehouse with free freight to the lower 48.
48-Inch Shallow-Depth Solid Door Back Bar Cooler in Stainless
A shallow depth back bar cooler gives you cold storage when the space behind the bar is tight. This one is only 24-1/2" deep, about 3-1/2" less than our standard Atosa back bar coolers, and still holds 11.5 cu. ft.
Where the Stainless 48" Solid Door Back Bar Cooler Fits Best
The SBB48GRAUS1 is stainless steel inside and out, the same look as most underbar sinks, ice bins and other bar equipment. Choose it when the cooler should match the working side of the bar.
- Service bars and back-of-house drink stations: stainless matches the rest of the bar equipment, and stock stays out of sight
- Restaurant and hotel kitchens: mixers, garnishes and backup bottles kept behind solid doors
- Catering and banquet setups: a locking stainless cabinet for beverage backstock
Its two solid doors have recessed handles and open about 17" past the front of the cabinet, so keep that much aisle clear behind the bar. Prefer black? The Atosa SBB48GRAUS2 is the same 48" cabinet and 11.5 cu. ft. with a black exterior.
Built for Daily Commercial Use
- Stainless steel inside and out
- Heavy duty compressor with R290, a natural refrigerant
- Slide out compressor assembly for easy service
- Electronic temperature controller
- Interior lights
- Magnetic door gaskets
- Door locks standard
- Recessed door handles
- Pre-installed epoxy coated shelves
- Pre-installed 2" casters
Pick the Right Size
| Model | Finish | Width | Capacity |
|---|---|---|---|
| SBB48GRAUS1 (this model) | Stainless | 48" | 11.5 cu. ft. |
| SBB48GRAUS2 | Black | 48" | 11.5 cu. ft. |
| SBB59GRAUS1 | Stainless | 57-3/4" | 15 cu. ft. |
| SBB59GRAUS2 | Black | 57-3/4" | 15 cu. ft. |
| SBB69GRAUS1 | Stainless | 68" | 18.6 cu. ft. |
| SBB69GRAUS2 | Black | 68" | 18.6 cu. ft. |
Want the black finish? See the Atosa SBB48GRAUS2, the same size in black.
Want glass doors instead? See the Atosa SBB48GGRAUS1, the same size with glass doors and LED lights.
Have more depth to work with? The Atosa MBB48GR is about 28" deep and holds more.
Shop all back bar coolers or our bar refrigeration.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Back bar cooler, 24-1/2" deep, two solid doors |
| Doors | 2 solid doors with locks, recessed handles, magnetic gaskets |
| Capacity | 11.5 cu. ft. |
| Shelves | (4) epoxy coated shelves |
| Exterior dimensions | 48" W x 24-1/2" D x 40-1/8" H |
| Temperature range | 35°F to 38°F |
| Temperature control | Electronic |
| Compressor | 1/7 HP, heavy duty, slide out assembly |
| Refrigerant | R290 |
| Construction | Stainless steel inside and out |
| Lighting | Interior lights |
| Casters | 2", pre-installed |
| Electrical | 115V / 60Hz / 1-phase, 2.3 amps |
| Plug | NEMA 5-15P |
| Net weight | 183 lb |
| Shipping weight | 227 lb |
| Warranty | 3-year parts and labor, 5-year compressor |
| Certifications | cETLus, ETL-Sanitation |
Before You Order
- Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
- Check your space: the unit is 48" wide, 24-1/2" deep and 40-1/8" tall.
- An open door reaches about 17" past the front of the cabinet (41-1/2" from the back of the unit). Make sure the aisle has room for that.
- Leave the unit some room to breathe and clean the condenser often, as Atosa advises.
Atosa SBB48GRAUS1 FAQ
What size is the Atosa SBB48GRAUS1?
The SBB48GRAUS1 is 48" wide, 24-1/2" deep and 40-1/8" tall. It weighs 183 lb (227 lb shipping weight).
How much does the SBB48GRAUS1 hold?
It holds 11.5 cu. ft. on (4) epoxy coated shelves.
What temperature does the SBB48GRAUS1 hold?
It holds 35°F to 38°F with an electronic temperature controller.
Does the SBB48GRAUS1 lock?
Yes. Door locks are standard.
How deep is a shallow back bar cooler?
The Atosa shallow models are 24-1/2" deep. Our standard Atosa MBB back bar coolers are about 28" deep, so the shallow models save about 3-1/2" of aisle space.
What power does the SBB48GRAUS1 need?
It runs on 115V and draws 2.3 amps. It has a standard NEMA 5-15P plug, so it plugs into a regular 115V outlet.
How often should I clean the SBB48GRAUS1 condenser?
Atosa says to clean the condenser frequently and to leave the unit some room to breathe. A clean condenser helps the cooler hold temperature.
What warranty comes with the SBB48GRAUS1?
3 years parts and labor and 5 years on the compressor.
Should I choose the stainless SBB48GRAUS1 or the black SBB48GRAUS2?
They are the same 48" wide, 24-1/2" deep cabinet with 11.5 cu. ft., the same solid doors and the same 115V power. The only difference is the outside: the SBB48GRAUS1 is stainless steel inside and out, and the SBB48GRAUS2 has a black exterior with a stainless interior. Pick the stainless SBB48GRAUS1 to match the rest of your bar equipment.
Spec Sheet
Download the Atosa SBB48GRAUS1 spec sheet (PDF, Rev. 07/26)
SBB48GR Parts & Service
For OEM replacement parts for the SBB48GR, see the SBB48GR parts list, with part numbers and quantities from Atosa's exploded-view diagram. Parts lists for every model are on the Atosa parts lists index.