{"product_id":"scrp-5b","title":"Winco SCRP-5B Grill Scraper Blade Only 5\" blade for SCRP-16 aluminum","description":"\u003ch2\u003eWinco SCRP-5B 5 Inch Replacement Blades - 6 Pack for SCRP-16 Griddle Scraper\u003c\/h2\u003e\n\n\u003cp\u003eThe Winco SCRP-5B is a 5-inch high-strength tempered steel replacement blade pack designed specifically for the Winco SCRP-16 griddle scraper handle. Sold in a 6-blade pack, the SCRP-5B is the consumable component that keeps the SCRP-16 performing at full cleaning effectiveness across its service life. As a blade-only replacement part, it allows kitchen operators to restore a sharp cutting edge to the SCRP-16 without replacing the handle assembly. At therestaurantwarehouse.com, the SCRP-5B is stocked as the standard replacement blade for operations running the SCRP-16 on 60-inch and 72-inch griddle surfaces where rapid surface recovery between orders is the primary cleaning objective.\u003c\/p\u003e\n\n\u003cp\u003eHigh-strength tempered steel construction gives the SCRP-5B the hardness and edge durability required for deep carbon removal on high-volume commercial griddles. The tempering process increases resistance to deformation under the mechanical load of scraping passes across a hot plate surface covered in baked-on carbon, caramelized grease, and polymerized oil residue. The 5-inch blade width represents the mid-range working dimension in the SCRP series, balancing the surface coverage needed on wide griddles against the maneuverability required to navigate grease trough edges and backsplash transitions without losing plate contact. The 6-blade pack format matches the consumable cycle of high-volume line cooking environments where blade replacement cycles are shorter than in light-duty operations, ensuring a dull or compromised blade can always be swapped immediately without a restocking delay interrupting the cleaning routine.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features of the SCRP-5B Replacement Blades\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e5-inch blade width matches the full working width of the SCRP-16 blade holder exactly - no modification or adjustment required\u003c\/li\u003e\n\u003cli\u003eHigh-strength tempered steel provides superior hardness and edge retention for deep carbon removal on wide griddle surfaces\u003c\/li\u003e\n\u003cli\u003e6 blades per pack enables advance stocking for fast, no-delay blade changes during service gaps and between high-volume service periods\u003c\/li\u003e\n\u003cli\u003eTempered steel blade tolerates the thermal demands of active cleaning at griddle cooking temperatures without deformation\u003c\/li\u003e\n\u003cli\u003e5-inch profile delivers the mid-range coverage needed on 60-inch and 72-inch commercial griddles in a single linear pass\u003c\/li\u003e\n\u003cli\u003eConsumable replacement model keeps the ongoing maintenance cost low over the full service life of the SCRP-16 handle assembly\u003c\/li\u003e\n\u003cli\u003eCompatible exclusively with the SCRP-16 handle - engineered to the dimensional specification of the SCRP-16 blade holder geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho the SCRP-5B Is Designed For\u003c\/h3\u003e\n\n\u003cp\u003eThe SCRP-5B is designed for existing Winco SCRP-16 users who need a reliable blade supply to keep the scraper functional through demanding service periods. The target user is an operator running a 60-inch or 72-inch commercial flat-top in a high-throughput kitchen where the griddle surface must be cleaned quickly between orders or between service blocks. The following operation types represent the core SCRP-5B user base:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eHigh-volume burger and fast-casual concepts where the griddle runs at full capacity through peak service periods with continuous between-order cleaning passes\u003c\/li\u003e\n\u003cli\u003eBreakfast and brunch operations using a wide flat-top griddle for simultaneous pancake, egg, and protein production requiring regular surface clearing\u003c\/li\u003e\n\u003cli\u003eHotel banquet and event kitchens using a 60-inch or 72-inch griddle to serve large groups over concentrated service windows\u003c\/li\u003e\n\u003cli\u003eSteakhouse and protein-forward restaurants where high-fat cooking on wide griddle surfaces generates significant carbon accumulation requiring aggressive removal\u003c\/li\u003e\n\u003cli\u003eSports arena and stadium concession operations running wide griddles through intense short-duration service windows with rapid surface recovery needs\u003c\/li\u003e\n\u003cli\u003eSchool and institutional cafeterias with wide commercial flat-tops serving multiple meal periods daily with consistent between-period cleaning requirements\u003c\/li\u003e\n\u003cli\u003eGhost kitchens and commissary operations running a 60-inch or wider griddle as a primary cooking surface through back-to-back production blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe SCRP-5B is a dedicated accessory for the SCRP-16 and is not interchangeable with the blade formats used on the SCRP-12 or SCRP-14 handles.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-Strength Tempered Steel Blade Performance\u003c\/h3\u003e\n\n\u003cp\u003eHigh-strength tempered steel occupies a distinct performance tier for griddle scraper blades. The tempering process relieves brittleness introduced during hardening while retaining elevated material hardness, producing a blade that combines hardness with toughness - resisting both deformation under mechanical load and fracture under impact. For a griddle scraper blade, this combination translates directly into reliable cleaning performance under the actual conditions of high-volume commercial use: high heat, heavy carbon loads, and the mechanical force of repeated firm scraping passes against a plate surface covered in baked-on residue.\u003c\/p\u003e\n\n\u003cp\u003eDeep carbon removal is the primary performance challenge for a replacement blade on a 60-inch or 72-inch griddle. Carbon buildup on a wide commercial flat-top accumulates faster than on a countertop unit because the plate area is larger and the cooking volume - and therefore the volume of food residue, rendered fat, and vaporized oil deposition - is proportionally greater. A blade that cannot hold its edge under the shear force required to break carbonized layers free from the plate surface becomes a maintenance liability. The high-strength tempered steel in the SCRP-5B resists this edge degradation, maintaining a functional cutting profile across more cleaning cycles before replacement is required. The material composition also resists the surface oxidation pathways that affect carbon steel blades in the humid, high-temperature environment above an active griddle, protecting both the blade and the food-contact plate surface.\u003c\/p\u003e\n\n\u003ch3\u003e6-Blade Pack Sizing for High-Volume Kitchens\u003c\/h3\u003e\n\n\u003cp\u003eThe 6-blade pack format is calibrated to the consumable rhythm of high-volume griddle operations running the SCRP-16 on wide commercial flat-tops. An operation running a 60-inch or 72-inch griddle through three daily service periods with between-batch cleaning and aggressive end-of-service carbon removal will cycle through blades meaningfully faster than a light-duty single-service kitchen. A pack of 6 blades at that cadence represents a supply horizon measured in weeks - which is the right stocking unit for a consumable that should always be available at the cleaning station.\u003c\/p\u003e\n\n\u003cp\u003eThe 6-blade count also aligns with multi-station kitchens running two or three SCRP-16 handles across a wide griddle line. When each handle gets a fresh blade at the same scheduled replacement interval, the pack covers one full replacement cycle for all stations, simplifying the stocking and replenishment calculation. Keeping one opened pack at the cleaning station and one sealed backup in the supply area prevents a blade shortage from disrupting service at any station on the line. When the pack reaches the last two blades, the reorder trigger is clear and the replacement supply arrives before stock is exhausted.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility With the Winco SCRP-16 Handle\u003c\/h3\u003e\n\n\u003cp\u003eThe SCRP-5B is engineered to a specific fit specification that matches the blade holder on the Winco SCRP-16 griddle scraper handle. It is a dedicated component - not a universal blade - that mates with the SCRP-16 holder precisely, and that precision is what makes it reliable under the mechanical stress of aggressive carbon removal passes on a wide commercial griddle surface.\u003c\/p\u003e\n\n\u003cp\u003eWhen a new SCRP-5B is installed, it seats at the same angle as the original blade and the retention mechanism holds it without play across the full 5-inch blade width. The blade edge maintains consistent contact across the full plate width during a scraping pass, producing clean, even debris removal rather than the streaky coverage or retention failures that result from dimensional mismatch with the SCRP-16 holder geometry.\u003c\/p\u003e\n\n\n\n\u003ch3\u003eBest Use Cases: Line Cooking and Deep Carbon Recovery\u003c\/h3\u003e\n\n\u003cp\u003eThe 5-inch SCRP-5B blade is matched to two primary use scenarios: rapid surface recovery during high-volume line cooking and deep carbon removal at end-of-service cleaning.\u003c\/p\u003e\n\n\u003cp\u003eDuring high-volume line cooking, each order deposits a layer of rendered fat, caramelized proteins, and cooking byproducts on the plate. On a 60-inch or 72-inch griddle running multiple concurrent orders, the cleaning demand between orders is significant and the time available is minimal. A sharp SCRP-5B allows the grill cook to execute a firm single-pass clearing stroke that moves accumulated debris into the grease trough in one motion. A dull blade requires multiple passes, consuming time that is not available during active service.\u003c\/p\u003e\n\n\u003cp\u003eDeep carbon recovery is a more demanding application. At end-of-service, hardened carbon layers bonded to the plate surface under extended heat exposure require sustained firm pressure and multiple aggressive passes. The high-strength tempered steel of the SCRP-5B holds its cutting profile through this sustained mechanical demand without deforming at the edge, enabling the operator to complete the carbon removal process fully rather than progressively losing effectiveness as the session continues.\u003c\/p\u003e\n\n\u003ch3\u003eHow to Replace the Blade on Your SCRP-16\u003c\/h3\u003e\n\n\u003cp\u003eReplacing the blade on the SCRP-16 using a SCRP-5B takes less than a minute when performed correctly. Confirm the griddle is out of active service and the handle is cool before beginning - blade replacement is safer and more precise away from cooking temperature.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eGrip the SCRP-16 handle firmly with the blade holder facing upward and the blade edge directed away from the palm of your hand.\u003c\/li\u003e\n\u003cli\u003eRelease the blade retention mechanism - this typically involves pressing a release tab or sliding a locking collar depending on the current production version of the SCRP-16 handle.\u003c\/li\u003e\n\u003cli\u003eSlide or pull the worn blade free from the holder slot, using a cloth or cut-resistant gloves to maintain control of the edge during removal and prevent a contact cut.\u003c\/li\u003e\n\u003cli\u003eInspect the new SCRP-5B blade before installation - confirm the edge is undamaged and the retention tab or notch is intact and properly formed.\u003c\/li\u003e\n\u003cli\u003eAlign the SCRP-5B with the holder slot, matching the retention tab or notch on the blade to the corresponding feature in the SCRP-16 holder.\u003c\/li\u003e\n\u003cli\u003ePress or slide the blade into the holder until it seats fully and the retention mechanism engages - a firm click or tactile stop confirms the blade is locked in position.\u003c\/li\u003e\n\u003cli\u003eTest the seating by pressing on the blade face and applying light lateral force to confirm no flex, rattle, or movement before returning the tool to the cleaning station.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWrap the worn blade in paper towel before placing it in a waste container to prevent cut injuries to anyone handling the bin.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to Change the Blade: Signs of Wear on Tempered Steel\u003c\/h3\u003e\n\n\u003cp\u003eRunning a worn blade past its effective service life reduces cleaning quality and increases the effort and time required to clear the griddle surface. The following indicators signal the blade should be replaced before the next cleaning cycle begins:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eDebris is smeared rather than lifted cleanly to the grease trough in a single firm forward pass - smearing indicates the edge is no longer making clean contact with the plate surface.\u003c\/li\u003e\n\u003cli\u003eMultiple passes are required to achieve the same plate cleanliness that previously required a single firm pass - increased pass count is a direct indicator of reduced edge effectiveness.\u003c\/li\u003e\n\u003cli\u003eVisible dulling, micro-chipping, or a whitish or flat edge reflection is present when the blade edge is inspected under direct light at a low angle.\u003c\/li\u003e\n\u003cli\u003eAny chipping, cracking, or deformation along the blade edge - even a single chip creates a stripe of uncleaned surface on every subsequent pass and should prompt immediate replacement.\u003c\/li\u003e\n\u003cli\u003eThe blade shows visible surface oxidation, pitting, or discoloration consistent with material degradation that may affect the safety of continued use on food-contact plate surfaces.\u003c\/li\u003e\n\u003cli\u003eThe blade no longer seats flush in the holder due to edge deformation or cumulative mechanical wear affecting the retention tab geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eReplacement frequency will vary by operation. A moderately busy kitchen running two daily services may find a blade lasts three to five weeks. A high-volume operation running three daily services with continuous between-batch cleaning and aggressive end-of-service carbon removal may cycle through a blade every two to three weeks. Track the replacement cadence and set a standing reorder schedule so SCRP-5B stock is refreshed before it reaches zero.\u003c\/p\u003e\n\n\u003ch3\u003eBlade Storage and Handling Safety\u003c\/h3\u003e\n\n\u003cp\u003eWhen the SCRP-5B pack is first opened, remove only the blades needed for immediate installation and reseal the packaging or transfer the remaining blades to a secure, lidded container labeled clearly with the contents. The original pack packaging can serve as temporary storage if resealed tightly, but a dedicated rigid-sided container at the cleaning station is the better long-term solution for operations cycling through blades regularly. Do not leave loose blades exposed on a counter, in an open drawer, or on a shelf where they can shift and expose their edges unexpectedly - a loose blade in a shared tool storage area is a cut hazard for anyone reaching in without visual confirmation of the contents.\u003c\/p\u003e\n\n\u003cp\u003eStore the container in a dry location away from steam lines and sink splash zones. Persistent moisture contact can affect stored metal components over extended periods - blades stored in pooled moisture can develop surface effects that compromise plate-contact cleanliness. When handling blades, use a cloth or cut-resistant gloves to maintain control of the edge at all times. Never grip a blade by its cutting edge regardless of how dull it appears. Wrap worn blades in paper towel before placing them in a waste container, applying the same sharps disposal approach used for any cutting tool removed from service in a commercial kitchen.\u003c\/p\u003e\n\n\u003ch3\u003eSCRP-5B Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWinco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSCRP-5B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGriddle scraper replacement blade pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Width\u003c\/td\u003e\n\u003ctd\u003e5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength tempered steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eWinco SCRP-16 griddle scraper handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Quantity\u003c\/td\u003e\n\u003ctd\u003e6 blades per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Plate Size\u003c\/td\u003e\n\u003ctd\u003e60-inch and 72-inch commercial griddle plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Use\u003c\/td\u003e\n\u003ctd\u003eHigh-volume line cooking, between-order surface recovery, deep carbon removal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Frequency\u003c\/td\u003e\n\u003ctd\u003eEvery 2 to 5 weeks depending on griddle usage intensity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions About the Winco SCRP-5B Replacement Blades\u003c\/h2\u003e\n\n\u003ch3\u003eWhat scraper does the SCRP-5B fit?\u003c\/h3\u003e\n\u003cp\u003eThe SCRP-5B is designed specifically for the Winco SCRP-16 griddle scraper handle. It is an exact-fit replacement blade engineered to the dimensional specification of the SCRP-16 blade holder, seating flush without modification and restoring the original blade geometry and cleaning angle when installed. The SCRP-5B retention tab and blade profile are matched to the SCRP-16 holder geometry and will not produce a secure, functional fit in any other handle in the SCRP series. Operators who need a replacement blade for a different SCRP handle should source the blade pack specified for that respective model rather than attempting to adapt the SCRP-5B to a different holder.\u003c\/p\u003e\n\n\u003ch3\u003eHow many blades come in a pack of SCRP-5B?\u003c\/h3\u003e\n\u003cp\u003eEach SCRP-5B pack contains 6 blades. The 6-blade format provides a working forward supply at the cleaning station for immediate blade changes during and after service without requiring a restocking order before the current blade is depleted. For high-volume operations running the SCRP-16 on a 60-inch or 72-inch griddle through multiple daily service periods, a 6-blade pack typically covers four to twelve weeks of normal blade replacement depending on service volume and cleaning intensity. For operations cycling through blades quickly, maintaining two packs on hand - one open and one sealed - prevents any service period from being affected by an unexpected blade shortage.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the blade made of?\u003c\/h3\u003e\n\u003cp\u003eThe SCRP-5B blade is made from high-strength tempered steel. The tempering process gives the cutting edge greater toughness and wear resistance than standard carbon steel alternatives, maintaining a functional cutting profile under the repeated mechanical load of aggressive scraping passes on hot griddle surfaces. The high-strength material resists edge deformation and micro-chipping during deep carbon removal passes where sustained firm pressure is applied against hardened residue bonded to the plate surface. The tempered steel composition also provides meaningful resistance to surface oxidation in the high-heat, humid environment above an active griddle, protecting the blade surface and the griddle plate from iron contamination during use.\u003c\/p\u003e\n\n\u003ch3\u003eHow often should I replace the SCRP-5B blade?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency depends on griddle usage intensity and cleaning demand. In a moderately busy kitchen running two daily service periods with regular between-order cleaning passes, a blade typically lasts three to five weeks before the edge dulls enough to affect cleaning effectiveness. In a high-volume operation running three full service periods daily with between-batch cleaning and aggressive end-of-service carbon removal on a 60-inch or 72-inch griddle, replacement every two to three weeks is more typical. Inspect the blade edge before each service. When the blade no longer clears the griddle surface in firm single passes, or when visible dulling, chipping, or damage is present along the edge, replace it with a fresh SCRP-5B before the next cleaning cycle begins.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I change the blade on my SCRP-16?\u003c\/h3\u003e\n\u003cp\u003eConfirm the handle is cool and the griddle is out of active service before beginning the blade change. Hold the SCRP-16 handle firmly with the blade holder facing upward and the blade edge directed away from your hand. Release the blade retention mechanism on the SCRP-16 holder by pressing the release tab or sliding the locking collar depending on the current production version of the handle. Remove the worn blade from the holder slot using a cloth or gloved hand to control the edge and prevent a contact cut. Inspect the new SCRP-5B for edge integrity before installation. Align it with the holder slot, matching the retention tab or notch on the blade to the corresponding holder feature, then press or slide it in until the retention mechanism engages fully. Confirm secure seating by pressing on the blade face to check for movement or rattle before returning the scraper to the cleaning station.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use the SCRP-5B on a hot griddle?\u003c\/h3\u003e\n\u003cp\u003eYes. The SCRP-5B blade is designed for use at griddle cooking temperatures when installed in the SCRP-16 handle. The tempered steel tolerates thermal contact with a hot plate without deformation. Heat insulation is provided by the SCRP-16 handle grip - the blade itself conducts heat and should never be touched directly during use. Allow the griddle to cool to the 200 to 250 degree Fahrenheit range before end-of-service deep cleaning for safer, more controlled debris removal.\u003c\/p\u003e\n\n\u003ch3\u003eIs the SCRP-5B blade dishwasher safe?\u003c\/h3\u003e\n\u003cp\u003eThe SCRP-5B blade material is compatible with commercial dishwasher temperatures and cleaning chemistry. However, the full SCRP-16 assembly - including the grip and locking mechanism - may not be suited to repeated commercial dishwasher cycles. For unused blades, dry storage in a clean container is sufficient. For the complete assembled scraper, hand washing with warm water and kitchen detergent followed by air drying is the recommended approach.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the SCRP-5B and the SCRP-4B?\u003c\/h3\u003e\n\u003cp\u003eThe SCRP-5B is a 5-inch high-strength tempered steel blade sold in a 6-blade pack, engineered for the Winco SCRP-16 handle. The SCRP-4B is a 4-inch hardened stainless steel blade sold in a 10-blade pack, engineered for the Winco SCRP-12 handle. The SCRP-5B covers more surface area per pass, making it better suited to 60-inch and 72-inch commercial griddles in high-volume service environments. The two blades are not interchangeable - each is dimensionally specific to its respective handle.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I safely store unused SCRP-5B blades?\u003c\/h3\u003e\n\u003cp\u003eStore unused SCRP-5B blades in a rigid-sided, lidded container labeled clearly with the contents. Keep the container in a dry location away from steam lines and sink splash zones. When retrieving a blade, use a cloth or cut-resistant gloves to handle the edge. Never leave loose blades exposed in an open drawer or on a counter surface. Wrap worn blades before disposal to prevent cut injuries to anyone handling waste containers.\u003c\/p\u003e\n\n\u003ch3\u003eWill the SCRP-5B fit the SCRP-12 or SCRP-14 scraper?\u003c\/h3\u003e\n\u003cp\u003eNo. The SCRP-5B is a 5-inch blade engineered for the SCRP-16 handle only. The SCRP-12 uses a 4-inch replacement blade and the SCRP-14 uses a 6-inch replacement blade - both are different dimensional specifications from the SCRP-5B, and the holder geometries are sized accordingly. A SCRP-5B installed in a SCRP-12 or SCRP-14 holder will not seat securely. Operators running the SCRP-12 should source the SCRP-4B, and operators running the SCRP-14 should source the blade pack specified for that model.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"Product\",\n      \"@id\": \"https:\/\/therestaurantwarehouse.com\/products\/scrp-5b#product\",\n      \"name\": \"Winco SCRP-5B 5 Inch Griddle Scraper Replacement Blades, 6-Pack\",\n      \"sku\": \"SCRP-5B\",\n      \"mpn\": \"SCRP-5B\",\n      \"url\": \"https:\/\/therestaurantwarehouse.com\/products\/scrp-5b\",\n      \"description\": \"Winco SCRP-5B high-strength tempered steel 5-inch griddle scraper replacement blade pack. 6 blades per pack. Exact-fit replacement for the Winco SCRP-16 griddle scraper handle. Designed for high-volume cleaning of 60-inch and 72-inch commercial griddle plates. Tempered steel construction provides superior edge retention and hardness for deep carbon removal in line cooking environments.\",\n      \"brand\": {\n        \"@type\": \"Brand\",\n        \"name\": \"Winco\"\n      },\n      \"category\": \"Commercial Kitchen Equipment \u003e Griddles \u003e Griddle Accessories \u003e Replacement Parts\",\n      \"isAccessoryFor\": {\n        \"@type\": \"Product\",\n        \"name\": \"Winco SCRP-16 Griddle Scraper\",\n        \"sku\": \"SCRP-16\"\n      },\n      \"additionalProperty\": [\n        {\"@type\": \"PropertyValue\", \"name\": \"Blade Width\", \"value\": \"5 inches\"},\n        {\"@type\": \"PropertyValue\", \"name\": \"Material\", \"value\": \"High-strength tempered steel\"},\n        {\"@type\": \"PropertyValue\", \"name\": \"Pack Quantity\", \"value\": \"6 blades per pack\"},\n        {\"@type\": \"PropertyValue\", \"name\": \"Compatibility\", \"value\": \"Winco SCRP-16 griddle scraper handle\"}\n      ]\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"@id\": \"https:\/\/therestaurantwarehouse.com\/products\/scrp-5b#faq\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What scraper does the SCRP-5B fit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The SCRP-5B is designed specifically for the Winco SCRP-16 griddle scraper handle. It is an exact-fit replacement blade engineered to the dimensional specification of the SCRP-16 blade holder, seating flush without modification and restoring the original blade geometry and cleaning angle. It is not a universal griddle blade and will not produce a secure fit in handles other than the SCRP-16 without confirming dimensional compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How many blades come in a pack of SCRP-5B?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Each SCRP-5B pack contains 6 blades. The 6-blade format ensures a working supply at the cleaning station for immediate blade changes without waiting on replenishment. For high-volume operations running the SCRP-16 through multiple daily service periods, a single pack typically covers four to twelve weeks of blade replacement depending on service intensity.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the blade made of?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The SCRP-5B blade is made from high-strength tempered steel. The tempering process gives the cutting edge greater toughness and wear resistance than standard carbon steel alternatives, maintaining a functional cutting profile under the mechanical load of aggressive scraping passes on hot griddle surfaces. The material also resists surface oxidation in the humid, high-temperature griddle environment, protecting the blade surface and the food-contact plate from contamination.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How often should I replace the SCRP-5B blade?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Replacement frequency depends on usage intensity. In a moderately busy kitchen running two daily services, a blade typically lasts three to five weeks. In a high-volume operation running three services daily with between-batch cleaning and aggressive end-of-service carbon removal, replacement every two to three weeks is more typical. Inspect the blade before each service and replace when it no longer clears the surface in firm single passes or when visible dulling or chipping is present.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I change the blade on my SCRP-16?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Confirm the handle is cool and the griddle is out of service before beginning. Hold the SCRP-16 with the blade holder facing upward and the edge away from your hand. Release the retention mechanism - press a release tab or slide the locking collar depending on the handle version. Remove the worn blade using a cloth to control the edge. Align the new SCRP-5B with the holder slot, matching the retention tab to the corresponding holder feature, then press or slide it in until the mechanism engages fully. Press on the blade face to confirm no movement before returning the tool to service.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use the SCRP-5B on a hot griddle?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes. The SCRP-5B blade is designed for use at griddle cooking temperatures when installed in the SCRP-16 handle. The tempered steel tolerates thermal contact with a hot plate without deformation. Heat insulation is provided by the SCRP-16 handle grip - the blade itself conducts heat and should never be touched directly during use. Allow the griddle to cool to the 200 to 250 degree Fahrenheit range before end-of-service deep cleaning for safer, more controlled debris removal.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the SCRP-5B blade dishwasher safe?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The SCRP-5B blade material is compatible with commercial dishwasher temperatures and cleaning chemistry. However, the full SCRP-16 assembly - including the grip and locking mechanism - may not be suited to repeated commercial dishwasher cycles. For unused blades, dry storage in a clean container is sufficient. For the complete assembled scraper, hand washing with warm water and kitchen detergent followed by air drying is the recommended approach.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the difference between the SCRP-5B and the SCRP-4B?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The SCRP-5B is a 5-inch high-strength tempered steel blade sold in a 6-blade pack, engineered for the Winco SCRP-16 handle. The SCRP-4B is a 4-inch hardened stainless steel blade sold in a 10-blade pack, engineered for the Winco SCRP-12 handle. The SCRP-5B covers more surface area per pass, making it better suited to 60-inch and 72-inch commercial griddles in high-volume service environments. The two blades are not interchangeable - each is dimensionally specific to its respective handle.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I safely store unused SCRP-5B blades?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Store unused SCRP-5B blades in a rigid-sided, lidded container labeled clearly with the contents. Keep the container in a dry location away from steam lines and sink splash zones. When retrieving a blade, use a cloth or cut-resistant gloves to handle the edge. Never leave loose blades exposed in an open drawer or on a counter surface. Wrap worn blades before disposal to prevent cut injuries to anyone handling waste containers.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will the SCRP-5B fit the SCRP-12 or SCRP-14 scraper?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No. The SCRP-5B is a 5-inch blade engineered for the SCRP-16 handle only. The SCRP-12 uses a 4-inch replacement blade and the SCRP-14 uses a 6-inch replacement blade - both are different dimensional specifications from the SCRP-5B, and the holder geometries are sized accordingly. A SCRP-5B installed in a SCRP-12 or SCRP-14 holder will not seat securely. Operators running the SCRP-12 should source the SCRP-4B, and operators running the SCRP-14 should source the blade pack specified for that model.\"\n          }\n        }\n      ]\n    },\n    {\n      \"@type\": \"Organization\",\n      \"@id\": \"https:\/\/therestaurantwarehouse.com\/#organization\",\n      \"name\": \"The Restaurant Warehouse\",\n      \"url\": \"https:\/\/therestaurantwarehouse.com\",\n      \"description\": \"The Restaurant Warehouse is a commercial restaurant equipment supplier offering griddle scraper replacement blades, griddle accessories, and commercial kitchen tools including the Winco SCRP-5B 5-inch replacement blade pack for the SCRP-16 griddle scraper.\"\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Winco","offers":[{"title":"Default Title","offer_id":43519299944507,"sku":null,"price":12.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/1000\/5307\/files\/SCRP-5B.webp?v=1779065600","url":"https:\/\/therestaurantwarehouse.com\/products\/scrp-5b","provider":"The Restaurant Warehouse","version":"1.0","type":"link"}