Hoshizaki PR93A-D4 4 Drawer and 1 Door 93-Inch Pizza Prep Table

$22,300.00 $8,977.98

Hoshizaki PR93A-D4 4 Drawer and 1 Door 93-Inch Pizza Prep Table

Hoshizaki Pizza Prep Table

Steelheart Series Pizza Prep Table, three-section, 30 cu. ft., (12) 1/3 pan rail capacity (pans & adapter bars included), (4) drawers each accommodate (2) 12” x 20” x 6” deep pans (pans by others), (1) door, 1/2" thick white polyethylene cutting board, stainless steel interior & exterior front, sides & top, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/2 HP, cord, NEMA 5-15P, cETLus, ETL-Sanitation (Made to order: allow 4-6 week lead time).

Dimensions: 43.5(h) x 93(w) x 36(d) inches.

Hoshizaki Pizza Prep Table Cabinet Construction

The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are stainless steel with an ABS ceiling and stainless steel floor. Mounted on anodized aluminum pilasters the shelves are adjustable in 1/2" increments. Cabinet walls and doors are insulated with 2" of foamed in place polyurethane. 6" polyolefin stem casters (two with brakes) are standard. The raised refrigerated rail is constructed of stainless steel interior and exterior (except back is galvanized steel). The rail is air cooled and utilizes a unique patent pending ducted air distribution system to distribute air evenly and maintain product temperature at safe levels. The rail will accommodate 1/8th, 1/3rd, 12 and full size pans 6" deep. Pans are located 1.5" below the front of the rail to assist in access to food product. An insulated, stainless steel, one piece hinged, lid is standard. Pizza preparation table is supplied with a 1/2" thick N.S.F. approved white polyethylene cutting board.

Hoshizaki Pizza Prep Table Drawer Construction

Drawer fronts are constructed of high grade stainless steel with stainless steel interior and are insulated with 2" CFC free, foamed in place polyurethane. Each drawer accommodates (2) 12" x 20" x 6" deep pans (pans by others). Dravwer frames are formed of 16 gauge stainless steel all welded construction and securely fastened in the cabinet. The drawer slides are constructed of heavy duty 14 gauge stainless steel and durable acetal rollers vith stainless steel ball bearings to prevent metal to metal contact. The dravwer slides have a dynamic load capacity of 250 lbs. and have been life tested (fully loaded) three hundred thousand cycles without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.

Hoshizaki Pizza Prep Table Refrigeration System

Front breathing refrigeration system allovs unit to be built into any enclosure with zero clearance at the side or rear. The high efficiency refrigeration system is self-contained with an epoxy electrocoated (E-Coat) evaporator coil for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. Än innovative ducted air distribution system distributes air evenly around food product in the rail. Engineered to maintain NSF-7 temperatures in 100°F ambient (Certified to NSF-7 temperatures in 86°F ambient.) Pizza preparation tables are supplied with a full complement of N.S.F. approved polycarbonate plastic, 1/3rd size pans, 4" deep and stainless steel adapter bars. 115 volt units are equipped with a ten foot cord and NEMA rated plug (20.0 amps or less). Hoshizaki Pizza Prep Table Warranty: 3-Year parts & labor on entire machine. 5-Year parts on compressor.

Need a true refrigerated food prep table without Drawers? 44 inch Pizza Prep Table, 67 inch Pizza Prep Table and 93 inch Pizza Prep Table